Cytotoxic effect of dental luting cement on human gingival mesenchymal stem cell and evaluation of cytokines and growth factor release - An in vitro study.

AIM: In routine dental care, various dental luting cements are utilized to cement the dental prosthesis. Thus, the aim of the current study was to assess the Cytotoxic effect of three different dental luting cements on human gingival mesenchymal stem cell and evaluation of cytokines and growth factors release. SETTINGS AND DESIGN: Cytotoxicity of glass ionomer cement (GIC), resin modified glass ionomer cement (RMGIC) and resin cement (RC) on the human gingival mesenchymal stem cells (HGMSCs) was evaluated. Amongst the cements tested, least cytotoxic cement was further tested for the release of cytokines and growth factors. MATERIALS AND METHODS: MTT test was used to evaluate the cytotoxicity of the dental luting cements at 1 h, 24 h, and 48 h on HGMSCs. Cytokines such as interleukin (IL) 1α & IL 8 and growth factors such as platelet derived growth factor & transforming growth factor beta release from the least cytotoxic RC was evaluated using flow cytometry analysis. STATISTICAL ANALYSIS USED: The mean absorbance values by MTT assay and cell viability at various time intervals between four groups were compared using a one way analysis of variance test and Tukey's post hoc test. The least cytotoxic RC group and the control group's mean levels of cytokines and growth factors were compared using the Mann-Whitney test. RESULT: As exposure time increased, the dental luting cement examined in this study were cytotoxic. RC was the least cytotoxic, RMGIC was moderate and glass ionomer cement showed the highest cytotoxic effect. Concomitantly, a significant positive biological response of gingival mesenchymal stem cells with the release of ILs when exposed to the RC was observed. CONCLUSION: For a fixed dental prosthesis to be clinically successful over the long term, it is imperative that the biocompatibility of the luting cement be taken into account in order to maintain a healthy periodontium surrounding the restoration.

In-vitro-cytotoxicity of self-adhesive dental restorative materials.

OBJECTIVES: Although the introduction of self-adhesive composites in restorative dentistry is very promising, the innovation of new materials also presents challenges and unknowns. Therefore, the aim of this study was to investigate the cytotoxicity of four different self-adhesive composites (SAC) in vitro and to compare them with resin-modified glass ionomer cements (RM-GIC), a more established group of materials. METHODS: Samples of the following materials were prepared according to ISO 7405/10993-12 and eluted in cell culture medium for 24 h at 37 °C: Vertise Flow, Fusio Liquid Dentin, Constic, Surefil One, Photac Fil and Fuji II LC. Primary human pulp cells were obtained from extracted wisdom teeth and cultured for 24 h with the extracts in serial dilutions. Cell viability was evaluated by MTT assay, membrane disruption was quantified by LDH assay and apoptosis was assessed by flow cytometry after annexin/PI staining. RESULTS: Two SAC (Constic and Vertise Flow) and one RM-GIC (Photac Fil) significantly reduced cell viability by more than 30% compared to the untreated control (p < 0.001). Disruptive cell morphological changes were observed and the cells showed signs of late apoptosis and necrosis in flow cytometry. Membrane disruption was not observed with any of the investigated materials. CONCLUSION: Toxic effects occurred independently of the substance group and need to be considered in the development of materials with regard to clinical implications. CLINICAL SIGNIFICANCE: SAC have many beneficial qualities, however, the cytotoxic effects of certain products should be considered when applied in close proximity to the dental pulp, as is often required.

Comparison of Cytotoxicity and Genotoxicity in Three Types of Indirect Restorative Materials on Human Periodontal Stem Cells.

PURPOSE: This study aimed to compare the cell toxicity and biological characteristics of Ketac GIC (glass-ionomer cement), Nexus RMGIC (resin-modified glass-ionomer cement), and RelyX RC (resin cement) in human periodontal stem cells (PDSCs). MATERIALS AND METHODS: To compare the effects of Ketac GIC, Nexus RMGIC, and RelyX RC on PDSCs, the cements were diluted from 1:2 to 1:8. PDSCs were then treated with the serially diluted cements with or without N-acetyl-cysteine (NAC), and cell survival was measured using water-soluble tetrazolium salt (WST-1) assay. Intracellular reactive oxygen species (ROS) was measured using 2',7'-dichlorofluorescin diacetate (DCFDA), and western blot analysis was performed to observe phosphorylation and activation of extracellular signal-regulated kinase (ERK) by Nexus RMGIC or RelyX RC. RESULTS: Cell death and proliferation were dose-dependently reduced following Nexus RMGIC or RelyX RC treatment. In addition, Nexus RMGIC or RelyX RC showed an increase intracellular ROS generation compared to Ketac GIC. Pretreatment with NAC confirmed the suppression of cell toxicity and ROS generation induced by Nexus RMGIC or RelyX RC. Nexus RMGIC or RelyX RC activates ERK phosphorylation, not p38 phosphorylation, in PDSCs. CONCLUSION: This study showed that the treatment with Nexus RMGIC or RelyX generates intracellular ROS and cell death through the ERK signaling pathway in PDSCs. In contrast, these effects were not observed with Ketac GIC, indicating that resin-based materials may have cytotoxic and genotoxic effects on PDSCs.

Assessment of Mechanical/Chemical Properties and Cytotoxicity of Resin-Modified Glass Ionomer Cements Containing Sr/F-Bioactive Glass Nanoparticles and Methacrylate Functionalized Polyacids.

This study prepared low-toxicity, elemental-releasing resin-modified glass ionomer cements (RMGICs). The effect of 2-hydroxyethyl methacrylate (HEMA, 0 or 5 wt%) and Sr/F-bioactive glass nanoparticles (Sr/F-BGNPs, 5 or 10 wt%) on chemical/mechanical properties and cytotoxicity were examined. Commercial RMGIC (Vitrebond, VB) and calcium silicate cement (Theracal LC, TC) were used as comparisons. Adding HEMA and increasing Sr/F-BGNPs concentration decreased monomer conversion and enhanced elemental release but without significant effect on cytotoxicity. Rising Sr/F-BGNPs reduced the strength of the materials. The degree of monomer conversion of VB (96%) was much higher than that of the experimental RMGICs (21-51%) and TC (28%). The highest biaxial flexural strength of experimental materials (31 MPa) was significantly lower than VB (46 MPa) (p < 0.01) but higher than TC (24 MPa). The RMGICs with 5 wt% HEMA showed higher cumulative fluoride release (137 ppm) than VB (88 ppm) (p < 0.01). Unlike VB, all experimental RMGICs showed Ca, P, and Sr release. Cell viability in the presence of extracts from experimental RMGICs (89-98%) and TC (93%) was significantly higher than for VB (4%). Experimental RMGICs showed desirable physical/mechanical properties with lower toxicity than the commercial material.

Enhancement of fluoride release in glass ionomer cements modified with titanium dioxide nanoparticles.

BACKGROUND: Several efforts have been made to improve the glass ionomer cements (GICs) properties with nanotechnology. Fluoride release in once of most beneficial properties of GICs. The purpose of this study was to evaluate the fluoride release, recharge, and cytotoxicity in GICs reinforced with titanium dioxide nanoparticles (TiO2N). OBJECTIVE: Evaluate the fluoride release, recharge, and cytotoxicity in GICs reinforced with TiO2N. METHODS: Four GICs, FUJI IX EXTRA (G1c), KETAC MOLAR (G2c), IONOFILL MOLAR (G3c), and FUJI IX (G4c) were combined with TiO2N (G1e, G2e, G3e, and G4e) and divided into blocks of 5-mm width and 1-mm thickness 10 each. A total of 80 samples were arranged as follows: GICs alone as negative control (n = 40) and GICs + TiO2N as experimental groups (n = 40). The fluoride release was determined for periods of 1, 2, 6, 10, 31, 90, 180, 240, and 300 days. On days 30 and 179, samples were recharged by submerging in 1 mL of 20,000 ppm sodium fluoride gel. Cytotoxic activity was carried out with gingival fibroblasts, using 3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyltetrazolium bromide cell viability assay. RESULTS: The experimental groups obtained the highest and more constant fluoride released when compared to control groups. After the first recharge, experimental groups (G1e, G3e, and G4e) showed statistically significant results (P = .001, 0.010, and 0.001 respectively) enhancing their recharge ability regarding control groups. The second recharge showed better results in G1e concerning the rest of the groups. No cytotoxic activity was observed in all experimental groups, although significant differences were observed in G3e and G4e regarding control group. CONCLUSION: The incorporation of TiO2N enhance the fluoride release in glass ionomers with a noncytotoxic effect on human gingival fibroblasts.

Assessment of genotoxicity of glass ionomer cements: a systematic review.

To evaluate, through a systematic review, the assessment of genotoxicity of glass ionomer cements in vitro and in vivo. A systematic review was performed with the problem, intervention, control, and outcomes (PICOS) strategy, aiming to answer the following question: "Can glass ionomer cements induce genetic damage in vitro and in vivo?" A systematic search was performed in the following electronic databases: PubMed (including MedLine), Web of Science, and Scopus. The quality of included studies was assessed using the Effective Public Health Practice Project (EPHPP). After the authors performed the review of all articles, a total of 13 manuscripts met all the inclusion criteria in the systematic review. Following the parameters of the EPHPP, eight articles were classified as strong or moderate quality. The other ones (five studies) were weak. Taken together our results demonstrated that, six studies reported genotoxicity of the modified glass ionomer cements tested and two studies concluded that the effect of genotoxicity was time dependent.

Enhancing glass ionomer cement features by using the calcium phosphate nanocomposite.

This study showed the synthesis of Glass ionomer cements (GIC) modified with calcium phosphate nanoparticles (nCaP). The nCaP/GIC were submitted to mechanical compression and diametral tensile tests. The biocomposite were characterized by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR). Cytotoxicity and cell viability tests were performed on the human bone marrow mesenchymal stem cells using a 3-(4,5-dimethylthiazol-2yl)2,5-diphenyl- tetrazolium-bromide assay and LIVE/DEAD assays. Statistically significant differences were observed for mechanical properties (Kruskal-Wallis, p<0.001), nCaP/GIC showed higher resistance to compression and diametral traction. The SEM analyses revealed a uniform distribution nCaP in the ionomer matrix. The EDX and XRD results indicated that hydroxyapatite and calcium ß-triphosphate phases. The FTIR spectra revealed the asymmetric band of ν3PO43- between 1100-1030cm-1 and the vibration band associated with ν1PO43- in 963cm-1 associated with nCaP. The nCaP/GIC presented response to adequate cell viability and non-cytotoxic behavior. Therefore, the new nCaP/GIC composite showed great mechanical properties, non-cytotoxic behavior, and adequate response to cell viability with promising dental applications.

In vitro biocompatibility testing of different base materials used for elevation of proximal subgingival margins using human gingival epithelial cells.

PURPOSE: To analyze the biological effects of four base materials used for elevation of proximal subgingival margins on gingival epithelial cells. METHODS: Twenty-eight specimens for each of the four base materials (total 112 specimens) were used: resin-modified glass ionomer (RMGI), glass hybrid (HV-GIC), flowable bulk fill resin composite (Bulk Flow) and bioactive ionic resin (Activa). Proximal enamel and root dentin were used as controls. Gingival epithelial cell viability was calculated after direct incubation on all four types of material for either 24 h or 72 h using both the methyl tetrazolium and trypan blue dye exclusion assays. Data were analyzed statistically using one-way analysis of variance, Tukey post hoc test and independent sample t-test (P < 0.05). RESULTS: Cell viability values in both assays showed significant differences among the study groups. Bulk Flow showed the highest values, followed in order by Activa and the control groups. Both HV-GIC and RMGI had the lowest values. Cell viability in all of the study groups was higher after incubation for 72 h than after 24 h. CONCLUSION: In terms of biocompatibility with epithelial tissues, bulk fill resin composite appears to be most suitable, followed by bioactive composite, for subgingival placement than glass ionomer-based materials, especially that containing 2-hydroxy-ethyl methacrylate.

Characteristics of experimental resin-modified glass-ionomer cements, containing alternate monomers to HEMA.

OBJECTIVE: Resin-modified glass ionomer cements (RMGICs) present several advantages (e.g. fluoride release), but their reported cytotoxicity has been associated with hydroxyethyl methacrylate (HEMA) monomer release. Therefore, different monomers were tested for use in RMGICs in order to improve their biocompatibility and reduce monomer release. METHODS: Eight experimental liquid compositions were prepared replacing different percentages of HEMA (conventional monomer used in commercial RMGICs) with hydroxypropyl-methacrylate (HPM) and/or tetrahydrofurfuryl-methacrylate (THFM), which are known to have better biocompatibility. Moreover, two commercial materials (Fuji-Plus and RelyX) and two compositions, based on these (home), were included as controls. Monomer release of all materials (commercial, home and experimental) were tested using high-performance liquid chromatography (HPLC) methods after immersing discs in deionized-water (DW) or ethanol:DW. Cytotoxicity of the materials extracts was tested on normal human oral fibroblast line (NHOF-1) using 3-(4,5-Dimethylthiazol-2-yl)-2,5-Diphenyltetrazolium Bromide (MTT) assay. RESULTS: Three experimental materials containing THFM (F3, R3 and R4) showed less or similar monomer release compared to corresponding commercial products. Furthermore, two experimental materials (F3 and F4) showed similar effects on NHOF-1 cells compared to the negative control medium. SIGNIFICANCE: The lower monomer release and higher cell viability of some experimental THFM compositions are encouraging. THFM partially replacing HEMA is potentially a suitable alternative for producing biocompatible RMGICs.

A modified glass ionomer cement to mediate dentine repair.

OBJECTIVES: Glass ionomer cements (GIC) can be used to protect dentine following caries removal. However, GIC have little biological activity on biological repair processes, which means that neo-dentine formation remains reliant on limited endogenous regenerative processes. Wnt/ß-catenin signalling is known to play a central role in stimulating tertiary dentine formation following tooth damage and can be stimulated by a range of glycogen synthase kinase (GSK3) antagonists, including lithium ions. METHODS: Here, we created lithium-containing bioactive glass (BG) by substituting lithium for sodium ions in 45S5 BG. We then replaced between 10 and 40% of the powder phase of a commercial GIC with the lithium-substituted BG to create a range of formulations of 'LithGlassGIC'. In vitro physical properties of the resulting glasses were characterised and their ability to stimulate reactionary dentine formation in mouse molars in vivo was tested. RESULTS: Lithium release from LithGlassGIC increased with increasing lithium content in the cement. In common with unmodified commercial GIC, all formations of LithGlassGIC showed in vitro toxicity when measured using an indirect cell culture assay based on ISO10993:5, precluding direct pulp contact. However, in a murine non-exposed pulp model of tooth damage, LithGlassGIC quickly released lithium ions, which could be transiently detected in the saliva and blood. LithGlassGIC also enhanced the formation of tertiary dentine, resulting in a thickening of the dentine at the damage site that restored lost dentine volume. Dentine regeneration was likely mediated by upregulation of Wnt/ß-catenin activity, as LithGlassGIC placed in TCF/Lef:H2B-GFP reporter mice showed enhanced GFP activity. SIGNIFICANCE: We conclude that LithGlassGIC acts as a biological restorative material that promotes tertiary dentine formation and restores tooth structure.

The effect of surface pre-reacted glass-ionomer filler eluate on dental pulp cells and mineral deposition on dentin: In vitro study.

The effects of surface pre-reacted glass-ionomer (S-PRG) filler on pulpal cells and on the composition of dentinal deposits were investigated. Proliferation (CCK-8), cytotoxicity (LDH), and differentiation activity (ALP) tests, along with cell morphology observations, were conducted at 6 and 24 h after treatment of pulpal cells with different S-PRG filler eluate concentrations. Dentinal surfaces were immersed in deionized water or S-PRG filler eluate followed by immersion in deionized water or simulated body fluid and observed under scanning electron microscope and elemental analysis using energy dispersive x-ray spectrometer. At 24 h, there were significant differences in CCK-8 and ALP activity values between the groups in a concentration-dependent manner. LDH test data were not significantly different among the groups. Cell morphology was not altered at either exposure time. However, decreased cellular density was observed with the highest eluate concentration. Crystalline deposits and occluded dentinal tubules were observed in samples immersed in S-PRG filler with a later immersion in simulated body fluid, which also showed higher concentrations of certain ions compared to surfaces that were not initially treated with S-PRG filler. The lowest two eluate concentrations did not show significant toxicity. S-PRG enhanced the effect of simulated body fluid in the formation of mineral deposits.

Biocompatibility of self-adhesive resin cement with fibroblast cells.

STATEMENT OF PROBLEM: Dental cements that release monomers that negatively impact adjacent oral soft tissues may adversely affect clinical outcomes. However, in vitro studies evaluating the cytotoxic and genotoxic potential of substances released from dental cements are lacking. PURPOSE: The purpose of this in vitro study was to define and compare the cytotoxicity and genotoxicity of the eluates of a self-adhesive resin cement (RelyX Unicem 2 Automix) autopolymerized and light polymerized with 2 other types of luting cements: a glass ionomer cement (Ketac Cem Easymix) and a resin-modified glass ionomer cement (Ketac Cem Plus). MATERIAL AND METHODS: The eluates were prepared, and 3T3 mouse fibroblast cells were exposed for 24 hours to serial eluate dilutions of the 3 types of cement. Cytotoxicity was determined by using a cell viability assessment through 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) and crystal violet assays. Genotoxic effects were determined by using the cytokinesis-block micronucleus assay. RESULTS: Cell viability was higher in the presence of the glass ionomer cement eluate than of the resin-modified glass ionomer cement and resin cement eluates. A pronounced decrease in viability was found when the cells were exposed to undiluted samples of resin-modified glass ionomer cement (around 50%) or resin cement (around 80% to 90%). No significant difference in cell viability was found between autopolymerized and light-polymerized resin cements. All cements induced a dose-dependent response of mononucleated cell formation. However, only the resin cements showed double strand breaks significant differences in the deoxyribonucleic acid (DNA) molecules against the basal DNA lesions that occurred spontaneously. CONCLUSIONS: The glass ionomer cement was not found to be cytotoxic or genotoxic, whereas the eluates derived from the resin-modified glass ionomer cement and resin cement, independently of the polymerization method, were cytotoxic in fibroblast cells. Maximum cytotoxicity was observed in the presence of resin cement, which also showed genotoxicity, independently of being light polymerized.

The cytotoxic and oxidative effects of restorative materials in cultured human gingival fibroblasts.

The aim of this study was to evaluate the cytotoxic and oxidative effects of the most commonly used dental restorative materials on human gingival fibroblast cells (HGFCs). HGFCs were obtained from healthy individuals. The tested restorative materials were a microhybrid resin based composite, a compomer resin, a glass ionomer cement, and an amalgam alloy. One hundred eight cylindirical samples, 10 mm in diameter and 2 mm in height, were prepared according to ISO 10993-12:2002 specifications (n = 9 in the tested subgroups). Freshly prepared and aged samples in artificial saliva at 37 °C (7 and 21 d) were placed into well plates and incubated. Wells without dental materials were constituted as the control group. After 72 h incubation period, cytotoxicity was determined using the neutral red (NR) assay. Oxidative alterations were assessed using total antioxidant capacity (TAC) and total oxidant status (TOS) assay kits. Data were analyzed using the ANOVA and LSD post hoc tests. All tested materials led to significant decreases in the cell viability rates (33-73%) compared to the control group. Glass ionomer and resin composite were found to be more cytotoxic than amalgam alloy and compomer. The highest TAC level was observed in glass ionomer after seven-day aging and these changes prevented an increase in TOS levels. Increases in TAC levels after seven-day aging in all groups exhibited significant differences with freshly prepared samples (p < 0.05). In all material groups, TOS levels of freshly prepared samples differed statistically and significantly from samples aged for 7 and 21 d (p < 0.05). The data obtained suggested that all the tested materials exhibited cytotoxic and pro-oxidant features. Freshly prepared samples caused higher TOS levels. However, oxidant status induced by materials decreased over time.

Optimal dilutions of S-PRG filler eluate for experiments on human gingival fibroblasts in vitro.

The present study attempted to identify the optimal dilution at which at which the effects of surface reaction-type pre-reacted glass-ionomer (S-PRG) filler eluate on human gingival fibroblasts (HGF) may be safely examined in vitro. S-PRG filler is a material that releases six ions and exerts strong caries-suppressing effects. We prepared S-PRG filler eluate in which S-PRG filler and α-MEM were mixed as a medium for HGF. This eluate contains six ions that are released from S-PRG filler. All cells died in proliferation experiments on HGF using S-PRG filler eluate, which demonstrated that unless S-PRG filler eluate was diluted, the ion concentration was strongly cytotoxic. S-PRG filler eluate diluted by 1/100 or more with the addition of 2% or more of FBS was safe for use. We herein successfully established the optimal dilution of S-PRG filler eluate at which HGF may be safely examined in vitro.

Antimicrobial activity and toxicity of glass ionomer cement containing an essential oil.

The aim of this study was to evaluate the antimicrobial activity and toxicity of glass ionomer cement (GIC) modified with 5-methyl-2-(1-methylethyl)phenol (thymol) against Streptococcus mutans in silico and in vitro. The antimicrobial activity of thymol on GIC modified with concentrations of 2% (GIC-2) and 4% (GIC-4) was evaluated in a model of planktonic cell biofilm using agar diffusion test, minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC), dynamic biofilm (continuous flow cell parallel), and bacterial kinetics. Conventional GIC (GIC-0) was used as a control. Thymol toxicity was evaluated in Artemia salina and in silico using Osiris® software. Differences between groups were estimated by analysis of variance, followed by Tukey post hoc test, with a 5% significance level. The results of the agar diffusion test between groups were not significantly different (P≥0.05). Thymol had potential bacteriostatic and bactericidal activity against Streptococcus mutans with respect to planktonic growth, with MIC of 100 µg/mL and MBC of 400 µg/mL. The groups GIC-0, GIC-2, and GIC-4 reduced the biofilm by approximately 10, 85, and 95%, respectively. Bacterial kinetics showed efficiency of the modified GICs for up to 96 h. GIC with thymol was effective against S. mutans, with significant inhibition of the biofilms. Analyses in silico and using Artemia salina resulted in no relevant toxicity, suggesting potential for use in humans. GIC-2 was effective against S. mutans biofilm, with decreased cell viability.

Antimicrobial activity and toxicity of glass ionomer cement containing an essential oil

The aim of this study was to evaluate the antimicrobial activity and toxicity of glass ionomer cement (GIC) modified with 5-methyl-2-(1-methylethyl)phenol (thymol) against Streptococcus mutans in silico and in vitro. The antimicrobial activity of thymol on GIC modified with concentrations of 2% (GIC-2) and 4% (GIC-4) was evaluated in a model of planktonic cell biofilm using agar diffusion test, minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC), dynamic biofilm (continuous flow cell parallel), and bacterial kinetics. Conventional GIC (GIC-0) was used as a control. Thymol toxicity was evaluated in Artemia salina and in silico using Osiris® software. Differences between groups were estimated by analysis of variance, followed by Tukey post hoc test, with a 5% significance level. The results of the agar diffusion test between groups were not significantly different (P≥0.05). Thymol had potential bacteriostatic and bactericidal activity against Streptococcus mutans with respect to planktonic growth, with MIC of 100 µg/mL and MBC of 400 µg/mL. The groups GIC-0, GIC-2, and GIC-4 reduced the biofilm by approximately 10, 85, and 95%, respectively. Bacterial kinetics showed efficiency of the modified GICs for up to 96 h. GIC with thymol was effective against S. mutans, with significant inhibition of the biofilms. Analyses in silico and using Artemia salina resulted in no relevant toxicity, suggesting potential for use in humans. GIC-2 was effective against S. mutans biofilm, with decreased cell viability.

Effects of surface pre-reacted glass-ionomer (S-PRG) eluate on Candida spp.: antifungal activity, anti-biofilm properties, and protective effects on Galleria mellonella against C. albicans infection.

Surface pre-reacted glass-ionomer (S-PRG) is a bioactive filler produced by PRG technology, which is applied to various dental materials. The inhibitory effects of S-PRG eluate against Candida, the most common fungal oral pathogen, were investigated. Minimum inhibitory concentrations (MIC) and anti-biofilm activities were tested against Candida albicans, Candida glabrata, Candida krusei, and Candida tropicalis. For the in vivo study, Galleria mellonella was used as a model to evaluate the effects of S-PRG on toxicity, hemocyte counts and candidiasis. The MIC of S-PRG ranged from 5 to 40% (v/v). S-PRG eluate exhibited anti-biofilm activity for all the Candida species tested. Furthermore, injection of S-PRG eluate into G. mellonella was not toxic to the larvae and protected G. mellonella against experimental candidiasis. In addition, S-PRG eluate inhibited biofilm formation by C. albicans, C. glabrata, C. krusei, and C. tropicalis and exerted protective effects on G. mellonella against experimental candidiasis in vivo.

Cell physiological effects of glass ionomer cements on fibroblast cells.

The cytotoxicity of glass ionomer cements (GICs) was investigated using a novel, cost-effective, easy-to-perform and standardized test. GIC rings were made using in-house designed, custom-made moulds under sterile conditions; 10 with Fuji Equia and 10 with Fuji Triage capsules, placed in direct contact with primary human gingival fibroblasts (HGF) and immortalized human fibroblasts (HFF1). On day 1, 4, 14 and 21, an AlamarBlue® (resazurin) assay was completed towards determining the effects of the GICs on metabolic activities of the cells, whilst cell morphology was examined by light microscopy. The influence of the compounds released from the GIC rings on cell physiological effects (viability, proliferation and adhesion) during 24 h incubation was further investigated by impedimetry. Result trends obtained from this battery of techniques were complementary. At 100 v/v% concentration, the released compounds from Equia were strongly cytotoxic, while at lower concentration (0, 4, 20 v/v%) they were not cytotoxic. In contrast, Triage elicited only slightly transient cytotoxicity. The method proposed has been proved as being efficient, reliable and reproducible and may be useful in quick testing of the cytotoxicity of similar biomaterials by using an immortalized cell line.

In vitro investigation of antimicrobial effects, nanohardness, and cytotoxicity of different glass ionomer restorative materials in dentistry.

AIMS: The aim of this in vitro study was to investigate the antimicrobial effects, nanohardness, and cytotoxicity of different glass-ionomer restorative materials in dentistry. MATERIALS AND METHODS: The following glass-ionomer restorative materials were used in our study: Argion (VOCO, Germany), Zirconomer (Shofu Inc., Japan), EQUIA Forte (GC, Japan), Fuji II LC capsule (GC, Japan), and Fuji IX GP capsule (GC, Japan). For the cytotoxicity test, a cell culture without release liquids was used as the control group. Microdilution and a disk diffusion test were used to measure the antimicrobial activity. The MTT (3- [4,5-dimethylthiazol-2-yl] -2,5-diphenyltetrazolium bromide) assay was used to evaluate cytotoxicity. Nanohardness was measured using a nanoindenter device. RESULTS: Our study determined that all restorative materials used in this study inhibited bacterial growth in cultures containing 1 × 102 cfu/ml of the bacterial concentrations (Lactobacillus casei and Streptococcus mutans) and that all restorative materials inhibited fungal growth in the cultures containing <1 × 102 cfu/ml of the fungal strains (Candida albicans). IC50 values obtained for the cytotoxicity test were analyzed using the Chi-square test. After a 72-h incubation period, Zirconomer, EQUIA Forte, Fuji IX GP capsule, and Fuji II LG capsule showed statistically significant lower cell viability values. (P < 0.05). The Kruskal-Wallis analysis was performed on the values obtained from the nanohardness test; the differences between the groups were found to be significant (P < 0.05). CONCLUSIONS: All materials tested showed low antimicrobial activity, and the antifungal activity of these materials was found to be lower than their antimicrobial activity. Only Argion showed non-cytotoxic effect. Beginning with the group with the highest nanohardness values and ending with the lowest, the groups are ranked in the following order: Fuji II LC capsule, EQUIA Forte, Argion, Fuji IX GP capsule, and Zirconomer.

Thermo-setting glass ionomer cements promote variable biological responses of human dental pulp stem cells.

OBJECTIVE: To evaluate the in vitro cytotoxicity of Equia Forte (GC, Tokyo, Japan) and Ionostar Molar (Voco, Cuxhaven, Germany) on human dental pulp stem cells (hDPSCs). METHODS: hDPSCs isolated from third molars were exposed to several dilutions of Equia Forte and Ionostar Molar eluates (1/1, 1/2 and 1/4). These eluates were obtained by storing material samples in respective cell culture medium for 24h (n=40). hDPSCs in basal growth culture medium were the control. Cell viability and cell migration assays were performed using the MTT and wound-healing assays, respectively. Also, induction of apoptosis and changes in cell phenotype were evaluated by flow cytometry. Changes in cell morphology were analysed by immunocytofluorescence staining. To evaluate cell attachment to the different materials, hDPSCs were directly seeded onto the material surfaces and analyzed by scanning electron microscopy (SEM). The chemical composition of the materials was determined by energy dispersive X-ray (EDX) and eluates were analyzed by inductively coupled plasma-mass spectrometry (ICP-MS). Statistical analysis was performed with analysis of variance (ANOVA) and Student's t-test (α<0.05). RESULTS: Undiluted Equia Forte extracts led to a similar cell proliferation rates than the control group from 72h onwards. There were no significance differences between Equia Forte and Ionostar Molar in terms of cell apoptosis and phenotype. However, in presence of Equia extracts the migration capacity of hDPSCs was higher than in presence of Ionostar Molar (p<0.05). Also, SEM studies showed a higher degree of cell attachment when Equia Forte extracts were used. Finally, EDX analysis pointed to different weight percentages of C, O and Ca ions in glass ionomer cements, while other elements such as La, Al, Si, W, Mo and F were also detected. SIGNIFICANCE: In summary, Equia Forte promoted better biological responses in hDPSCs than Ionostar Molar.